THat link is for the post you just posted (#61 just above) with that link. :(

https://cimg8.ibsrv.net/gimg/www.off...fd785d5f1.jpeg
https://cimg9.ibsrv.net/gimg/www.off...6bf6c24cf.jpeg
https://cimg1.ibsrv.net/gimg/www.off...95ed02e7d.jpeg
I talked to you awhile back here in regards

THe cam in the OP of this thread is 224*224*at .050” and 112 lsa. Says it right on the card. (107 icl and 117ecl = 112lsa)

So now you are saying it maybe 114 lsa?

Did he give you the wrong cam sheet for the cam in your engine ?

I’ saying following mattet of fact, not provokingly. I’m leaving this thread, too much going around in circles for me. I made recommendation and statements earlier. I will stick by them.

Sorry... never meant to p you off at all bud.. I was only trying to make sure that things were for certain before having to change out the cam.. I wasn’t for sure if you were able to get what you needed from the sheet so just tried to get all info to make certain.