350 SBC cam
04-01-2021, 11:17 AM
#61
Registered
04-01-2021, 11:22 AM
#62
Registered
iTrader: (1)
04-01-2021, 01:27 PM
#63
Registered
04-01-2021, 01:50 PM
#65
Registered
iTrader: (1)
THe cam in the OP of this thread is 224*224*at .050” and 112 lsa. Says it right on the card. (107 icl and 117ecl = 112lsa)
So now you are saying it maybe 114 lsa?
Did he give you the wrong cam sheet for the cam in your engine ?
I’ saying following mattet of fact, not provokingly. I’m leaving this thread, too much going around in circles for me. I made recommendation and statements earlier. I will stick by them.
So now you are saying it maybe 114 lsa?
Did he give you the wrong cam sheet for the cam in your engine ?
I’ saying following mattet of fact, not provokingly. I’m leaving this thread, too much going around in circles for me. I made recommendation and statements earlier. I will stick by them.
04-01-2021, 02:07 PM
#66
Registered
Sorry... never meant to p you off at all bud.. I was only trying to make sure that things were for certain before having to change out the cam.. I wasn’t for sure if you were able to get what you needed from the sheet so just tried to get all info to make certain.
