|
Originally Posted by Ryanw10
(Post 4901720)
Is it a stock 502? To get those power numbers out of a stock 502 I would think you need quite a bit of boost
|
Originally Posted by S8D4
(Post 4901721)
Stock engine bore to 4.320 . Only arp head stud , manley inconel valve , cometic head gasket . 4 pounds of boost they said .
|
Originally Posted by Ryanw10
(Post 4901722)
Do you not have a boost gauge on the boat?
|
Originally Posted by Ryanw10
(Post 4901722)
Do you not have a boost gauge on the boat?
|
Originally Posted by S8D4
(Post 4901724)
yes boost , egr , fuel pressure .
|
Originally Posted by Ryanw10
(Post 4901725)
Were you seeing the same 4 psi on the boat as they saw on the dyno?
|
But as I said it wouldnt go more than 4600rpm so did not go into full boost . But gauge was going this way
|
Originally Posted by Ryanw10
(Post 4901725)
Were you seeing the same 4 psi on the boat as they saw on the dyno?
https://cimg8.ibsrv.net/gimg/www.off...f32a1954f6.jpg https://cimg3.ibsrv.net/gimg/www.off...b056e97629.jpg https://cimg8.ibsrv.net/gimg/www.off...979817bcbd.jpg https://cimg2.ibsrv.net/gimg/www.off...46a636303f.jpg |
Now I have 10 post :D
|
|
| All times are GMT -5. The time now is 02:45 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.