what is top speed for 28 zx
#12
Registered
Join Date: Sep 2008
Location: LOTO
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
What brand are the 4 blade props? was thinking about getting some for better take off and mid range but don't know now if it kills your top end that much
#13
Registered
Thread Starter
Join Date: Dec 2008
Location: ft lauderdale, florida
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
low to mid 60 mph....thats crazy I run 70-71. with stock everything. just make sure you run your tabs at around 1 OR THE BOAT WILL RUN SLOWWW. I spentsome time on this....(a sub and some beer) anything past one will cause it to loose speed. Ican only guess its because it keepstoo much of the boat in the water
#14
Registered
Join Date: Dec 2008
Location: Marinette, WI
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I am running power tech OFS props 22 pitch. The boat comes out of the hole very smooth and quick. 4800 rpms top end no tabs applied. tried trimming the drives every where... 63mph on gps
#15
Registered
Join Date: Feb 2005
Location: mason,ohio
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Mine will do 73-74 depending on cooler and fuel, last gps was 73.2 with 3 people 3/4 fuel and coolers and crap. mirage 27 pitch 3 blades. It sucks coming out of the hole but one it's up it's great, oh thats at 5000 rpms.
#18
#20
Registered
I have 377 MPI (6.2's), with 1.65 drives. I run 26" Bravo 1's to the mid 60's. The factory gave me 23 M+'s but I was on the limiter with them because of the drive ratio.