Go Back  Offshoreonly.com > Owners Forum > Donzi
Total Length of Classic 18 from front of trailer to prop >

Total Length of Classic 18 from front of trailer to prop

Notices

Total Length of Classic 18 from front of trailer to prop

Thread Tools
 
Old 09-06-2015 | 05:09 PM
  #1  
Thread Starter
Registered
 
Joined: Jul 2014
Posts: 104
Likes: 0
Default Total Length of Classic 18 from front of trailer to prop

Looking at using a Donzi Classic 18 for a project, but need to know the overall length of the entire boat on a trailer to see if it will work for my application and for storage. Looking for how much room I need from front of trailer back to the prop. Thank you!!
Superman09 is offline  
Reply
Old 09-07-2015 | 09:41 AM
  #2  
Registered
 
Joined: Mar 2006
Posts: 673
Likes: 12
Default

----Kind of hard to do without knowing more about the trailer.......Bill S
olredalert is offline  
Reply
Old 09-08-2015 | 08:49 AM
  #3  
mattyboy's Avatar
Registered
20 Year Member
 
Joined: Oct 2001
Posts: 582
Likes: 0
From: greenwood lake USA
Default

the specs I have on the older volvo 18's are 19' 4" including the outdrive so I would say the boat by itself with the drive up is 20 feet easy and as Bill said tough to guess without knowing the trailer, my 19 hornet on it's trailer is all of about 27 feet tip to tip with the drive up i have seen some use a swing away tongue trailer and removing the outdrive to make fit in the garage when space is tight

Last edited by mattyboy; 09-08-2015 at 08:51 AM.
mattyboy is offline  
Reply
Old 09-12-2015 | 03:02 PM
  #4  
Registered
20 Year Member
 
Joined: Dec 2003
Posts: 885
Likes: 2
From: SoCal
Default

My 18' sutphen with volvo 290 and swing-away tongue trailer was 24 feet. I fit her diagonally in a short 18 foot deep 2 bay garage. Tight as could be though...
dave911 is offline  
Reply
Old 09-12-2015 | 03:23 PM
  #5  
Thread Starter
Registered
 
Joined: Jul 2014
Posts: 104
Likes: 0
Default

Thanks! I have 24' deep bays. I could angle it a little bit. Just looking for some rough measurements to see if I could squeeze one of these on a trailer into one of my bays. Keep em' coming!
Superman09 is offline  
Reply
Old 11-21-2016 | 05:03 PM
  #6  
Registered
5 Year Member
 
Joined: Sep 2016
Posts: 190
Likes: 13
From: Waterford, Michigan
Default

My 18 just fits in a 22' stall without doing some unnatural things I think you should be good with a 24' space
sandslot is offline  
Reply
Old 11-22-2016 | 12:40 AM
  #7  
Griff's Avatar
Charter Member # 55
25 Year Member
Charter Member
Super Moderators
 
Joined: Oct 2000
Posts: 20,232
Likes: 2,482
From: Omaha/LOTO
Default

On a steel trailer, it should fit into a 24' deep bay. Aluminum trailer tongues are usually longer.
Griff is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.