Go Back  Offshoreonly.com > Owners Forum > Donzi
22 classic HP/speed Question >

22 classic HP/speed Question

Notices

22 classic HP/speed Question

Thread Tools
 
Old 12-21-2015 | 05:08 PM
  #31  
Registered
20 Year Member
 
Joined: Jan 2002
Posts: 2,053
Likes: 39
From: Further South East of Dome Island
Default

Totally stock 1996 donzi 22 classic with 502 Mag 415hp runs 74.3mph with stock 25" MPlus and 75.5mph with a labbed 27" MPlus. Fresh water, GPS speeds. The key to top end in these boats is trim, trim, and more trim, almost to the limit which is higher than most will go. Many of the speeds i have read here seem a little slow, probably due to this. Go to HO setup and you will get over 75.
Pismo10 is offline  
Reply
Old 12-21-2015 | 06:03 PM
  #32  
Registered
 
Joined: Mar 2014
Posts: 346
Likes: 3
From: Pittsburgh, PA
Default

My numbers are low, but not because of a lack of trim. My slip numbers are good at 8%, it's just a lack of rpm. If i get another 400 rpm its another 5mph at the same slip. My motor only has 10 hours on it. My number will be better next year after I get the motor dialed in. I taking the motor to the dyno in January to get the carb and timing set. I appreciate the advice and I will post some numbers once the summer comes around.
DBleil89 is offline  
Reply
Old 12-21-2015 | 10:56 PM
  #33  
Registered
 
Joined: Feb 2012
Posts: 108
Likes: 0
From: Antioch, IL
Default

Just picked up a 96 22 Classic w/ 454 Magnum MPI EFI and Bravo One Drive. In storage for the winter. Previous owner said it runs 68mph. Has a pretty beat up 23p Mirage prop. It's such a cool boat. Never thought I'd own one, but it popped up locally and the price was right. Looking forward to hearing all your results...I'll be posting mine in the spring.

Larry
Larry Gempp Jr. is offline  
Reply
Old 11-27-2016 | 10:08 PM
  #34  
Registered
 
Joined: Jun 2015
Posts: 15
Likes: 0
Default

Do you know if the bottom of the Shelby model is the same as the standard Classic bottoms? Obviously the hatch, windscreen, upholstery and a few minor hardware fittings are different. Thank you!
imagemaker7777 is offline  
Reply
Old 11-28-2016 | 05:13 AM
  #35  
Registered
20 Year Member
 
Joined: Jan 2002
Posts: 2,053
Likes: 39
From: Further South East of Dome Island
Default

Originally Posted by imagemaker7777
Do you know if the bottom of the Shelby model is the same as the standard Classic bottoms? Obviously the hatch, windscreen, upholstery and a few minor hardware fittings are different. Thank you!
Same bottom
Pismo10 is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.