Slightly bent skag on lower drive.
09-06-2007, 12:27 PM
#1
Platinum Member
Platinum MemberThread Starter
Join Date: Apr 2001
Location: Nashotah, WI
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Slightly bent skag on lower drive.
My skag on my Bravo 1 drive has a slightly lower rear bend in it. How would someone straiten
out the corner? Applying heat with a heat gun and hammer or is there another method.
Thanks
out the corner? Applying heat with a heat gun and hammer or is there another method.
Thanks
