![]() |
Originally Posted by Brent Medley
(Post 2538858)
Teague drive rated for 900
|
Originally Posted by Panther
(Post 2539135)
My friend has 3 of those Teagues on his boat with 600's. He blew two of them last year, one from a piece of drift wood, the 2nd for no reason and the third had to be rebuilt this winter..... :(
|
Originally Posted by Rik
(Post 2539203)
What happened to the 'Warranty"?
|
Originally Posted by Panther
(Post 2539245)
Warranty....pfffftttttt..... :hitfan:
|
Originally Posted by Rik
(Post 2539203)
What happened to the 'Warranty"?
And how much you want to put up ! yes Rik $46,000 plus Labor can buy better odds to gamble with . Most of us in the horse power range of this thread would like a good gamble for less then that though ! That's why it is allways back to the drawing boards for us bravo players . MY $.02 GOOD GAMBLING EVERYONE !!!!!!!!!!!!!!! |
Originally Posted by Rik
(Post 2539329)
caveat emperor
PS, There's a guy in our area that has a 32' Skater with Arnesons and he keeps blowing them up. I believe Arneson has worked with him every step of the way but he's broken them quite a bit and had some downtime. I believe something in the tie-bar setup kept ripping off or something like that.... :( I've heard of people blowing stuff up, no matter what drive system they have; Imco, Max Machine, BMax, Teague, Arneson, Konrad et al. |
Anything can be broken!
|
Originally Posted by Pantera28-650HP
(Post 2539756)
Anything can be broken!
|
Originally Posted by Panther
(Post 2539538)
On the flip side I've had the Bravoshop do warranty work for me this year and they didn't even blink an eye... All they said was ship it down and we'll turn it around... I told them not to rush it because my season was over (mistake on my part) and it took a bit longer than I hoped for but in the end they took care of it, "and then some".. :cool-smiley-011:
PS, There's a guy in our area that has a 32' Skater with Arnesons and he keeps blowing them up. I believe Arneson has worked with him every step of the way but he's broken them quite a bit and had some downtime. I believe something in the tie-bar setup kept ripping off or something like that.... :( I've heard of people blowing stuff up, no matter what drive system they have; Imco, Max Machine, BMax, Teague, Arneson, Konrad et al. Changed the mount and he is good. That was 2 years after he purchased them so customer service is what is imporntant. |
Originally Posted by Rik
(Post 2540090)
That is Kenny Paddock and he cracked a tie bar mount. Far from blowing up.
Changed the mount and he is good. That was 2 years after he purchased them so customer service is what is imporntant. I was under the impression it broke more than once and a new one was being made out of Bronze/brass????? Why would it break, he only runs the boat in the bay. Maybe the info he gave was incorrect? We all have our fair share of problems. :( |
| All times are GMT -5. The time now is 04:30 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.