![]() |
the new name in new drives might be XPOWER !
|
Sorry for the delay. 800hp 863 torque@4700rpm on a 10,000 boat.
|
Konrad!!!! :d
|
I better be seeing you spank that thing on the Chain this summer....:party-smiley-004:
|
i hear the new x power drives at the la show bolt right to the bravo gimble... look pretty trick too check it out xpowerdrive.com
|
Originally Posted by RBeyer
(Post 2451805)
If you are under 14000lbs I would go with B-Max alot cheaper than Konrad although I hear good things and you don't need a trans.
Yah, what he said. There are a couple of used B maxes in the clasifieds here. I think I'm going to a B max once my XR fails. |
There is also a new drive by Imco, and some company called X power too. Both are Bravo replacments. The new Imco runs around the same price as a B Max. The X power I am unsure.
|
I ran 900+hp through regular bravos on a 96' 42 fountain. I had Teague billet top caps and replaced what ever broke with Teague parts. Yes I broke a couple of drives, but it was minimal and not that expensive to fix. Just keep the drives in the water and NO hole shots, just ease into it.:D
|
Originally Posted by 44MTI
(Post 2460872)
I ran 900+hp through regular bravos on a 96' 42 fountain. I had Teague billet top caps and replaced what ever broke with Teague parts. Yes I broke a couple of drives, but it was minimal and not that expensive to fix. Just keep the drives in the water and NO hole shots, just ease into it.:D
did you mean bravo one's or xr's ? |
hey nauti been running xr's for three years now with 850+ and knock on wood no problems, Just be easy getting on plane and getting air, I've got a 37 ol with 0 problems!!! It's all how you treat them.
|
| All times are GMT -5. The time now is 02:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.