Imco And Seaweed
#1
Registered
Thread Starter
Imco And Seaweed
i have about 400ft of seaweeds ,,,that mossie string stuff,,,that floats near the top,,,(beforei get to clean deep water),,,having an imco lower,,,whats the fix ie. some type of screen ,,to keep seaweed from geting sucked up into the drive,,,what have you guys used to stop this,,,
#3
Registered
Thread Starter
#6
Registered
Thread Starter
#7
Registered
Thread Starter
yea i hear you,,,,what worked better for me was,,,after i go into reverse and get the boat moving back,,,,i shut down the engines,,,,this stops the sucking of the seapump ,,,which is help holding the seaweed onto the drive,,,seaweed falls off restart up and go
#8
Registered
that CAN work, but just this weekend I was plugged up, not enough to stop all water flow, but enough for me to notice my water temps climbing some, and nothing I could do would dislodge the seaweed. It was all plugged up when I put it on the trailer.
You could just fill a 55 gallon drum with water and run a hose from that to your water pump. Run off that until you are clear of the seaweed....
You could just fill a 55 gallon drum with water and run a hose from that to your water pump. Run off that until you are clear of the seaweed....
#9
Registered
Thread Starter
http://www.twpinc.com/twpinc/control...4X004A0470W36T iam thinking something like this welded over the water intake,,,you would think imco would all ready have a fix by now,,,why drive all the way down the field( imco),,,and not score???
Last edited by TWIN-SPINS; 06-22-2010 at 10:08 AM.