Notices

XR help neded

Thread Tools
 
Old 07-18-2010 | 08:15 PM
  #1  
Thread Starter
Registered
 
Joined: Feb 2002
Posts: 53
Likes: 0
From: ohio
Unhappy XR help neded

My Bravo XR started performing strangely today. One time when slowing down for a no-wake zone the drive seemed to "slip" as the boat leveled off and as I applied the throttle it grabbed and the boat lurched forward. Another time when accelerating from a stop the boat planed normally then the drive seemed to "slip" again and the engine reved up as the speed stayed constant. After a brief period everything returned to normal. It was as if the prop was ventilating, but I know there are no issue with the prop. When I put the boat on the trailer I put the outdrive in forward. I can spin the prop freely to the right which I believe is normal. I can also spin the prop counterclockwise if I pull hard enough. Sometimes it wont turn much, however, if you turn it clockwise a little, I can turn it counterclockwise roughly 3/4 of a turn of the prop?????
boaterh is offline  
Reply
Old 07-18-2010 | 09:48 PM
  #2  
Registered
 
Joined: May 2009
Posts: 66
Likes: 0
From: Tennessee
Default

Originally Posted by boaterh
My Bravo XR started performing strangely today. One time when slowing down for a no-wake zone the drive seemed to "slip" as the boat leveled off and as I applied the throttle it grabbed and the boat lurched forward. Another time when accelerating from a stop the boat planed normally then the drive seemed to "slip" again and the engine reved up as the speed stayed constant. After a brief period everything returned to normal. It was as if the prop was ventilating, but I know there are no issue with the prop. When I put the boat on the trailer I put the outdrive in forward. I can spin the prop freely to the right which I believe is normal. I can also spin the prop counterclockwise if I pull hard enough. Sometimes it wont turn much, however, if you turn it clockwise a little, I can turn it counterclockwise roughly 3/4 of a turn of the prop?????
You have spun the prop . rubber in middle of prop has let loose.
FIRST AFENCE is offline  
Reply
Old 07-19-2010 | 04:36 AM
  #3  
Thread Starter
Registered
 
Joined: Feb 2002
Posts: 53
Likes: 0
From: ohio
Default XR kelp

Thanks. I checked the prop shaft while turning by hand. The shaft and the prop turn together. The XR drive has the removable hub in the prop. It appears to be in good condition.
boaterh is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.