Offshoreonly.com

Go Back  Offshoreonly.com > Technical > Drives and Lower Units
1000hp drive >

1000hp drive

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

1000hp drive

Thread Tools
 
Old 11-21-2010, 05:42 PM
  #51  
Rik
arneson-industries.com
Offshoreonly Advertiser
 
Rik's Avatar
 
Join Date: Jan 2001
Location: California
Posts: 2,782
Likes: 0
Received 5 Likes on 5 Posts
Default
Originally Posted by campionchase910
Rik, I have a lead on two arneson 6's. I only need one. If I sell the other what is iinvolved to have the left hand rotation made to right? One is right and one is left; I am not familiar enough to know what is involved. Also how hard would it be to take my volvo transom rigging out to convert. Is there fibreglass and re-enforcing involved? Thanks in advance.
If you are getting two and one is currently RH then why change the LH to RH?

Either way, the internals of the LH can be swapped out to be RH and vice versa.

Converting from any I/O would only require our standoff box as it will cover the transom cut out and not require any glass work.
__________________
Arneson Surface Drives www.arneson-industries.com
Rik is offline  
Reply
Old 11-21-2010, 06:04 PM
  #52  
Registered
 
Join Date: Mar 2007
Location: Lake Dallas, TX
Posts: 1,087
Likes: 0
Received 0 Likes on 0 Posts
Default
One other route to consider:

http://www.weismann.net/Press%20Page...annDuoProp.htm

I have no idea the cost, I know PowerPlay "Steve 1" knows about this drive, he recommended it on another application.
bert4332 is offline  
Reply
Old 11-21-2010, 06:36 PM
  #53  
Registered
Thread Starter
 
Join Date: Jan 2008
Location: Sudbury, Ontario
Posts: 477
Received 2 Likes on 2 Posts
Default
Originally Posted by Rik
If you are getting two and one is currently RH then why change the LH to RH?

Either way, the internals of the LH can be swapped out to be RH and vice versa.

Converting from any I/O would only require our standoff box as it will cover the transom cut out and not require any glass work.
Thanks Rik. I like the fact that there is no fiberglass work required. What is the stand off box worth. I only was wondering to convert the left hand to a right in order to sell it as I will only need the one.
campionchase910 is offline  
Reply
Old 11-21-2010, 06:46 PM
  #54  
Registered
iTrader: (4)
 
Join Date: Jul 2007
Location: Oneida Lake NY
Posts: 3,641
Received 29 Likes on 6 Posts
Default
Originally Posted by Rik
Standard rotation motors. The out drives handle the propeller (RH or LH ) rotations.
Rik I have two friends with ASD8-10s running lh and rh motors, and trannies. I am confused. I don't know how the drive could determine the rotation??
4bus is offline  
Reply
Old 11-21-2010, 10:18 PM
  #55  
Rik
arneson-industries.com
Offshoreonly Advertiser
 
Rik's Avatar
 
Join Date: Jan 2001
Location: California
Posts: 2,782
Likes: 0
Received 5 Likes on 5 Posts
Default
Originally Posted by 4bus
Rik I have two friends with ASD8-10s running lh and rh motors, and trannies. I am confused. I don't know how the drive could determine the rotation??
That is not the drive he is asking about. I have counter rotating ASD8-10's also but not all ratios.
__________________
Arneson Surface Drives www.arneson-industries.com
Rik is offline  
Reply
Old 11-24-2010, 09:32 PM
  #56  
Registered
 
Join Date: Nov 2010
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by kreed
Yepp!
Didn't think the 910 came as a single drive option. Well, you learn something new every day.

Go with something strong. Arneson.

______________________
Download wii games
Burn Wii games
ellyka112 is offline  
Reply
Old 12-08-2010, 06:21 PM
  #57  
Registered
 
Join Date: Dec 2008
Location: 1000 Islands
Posts: 155
Likes: 0
Received 0 Likes on 0 Posts
Default switching from xr to arneson
Can someone explain what is actually involved in changing from a Bravo Xr with ITs to a Arneson ? Does the transom assembly / motor ..etc need to come out ?? Is a transmission required ??
whataride is offline  
Reply
Old 12-08-2010, 08:06 PM
  #58  
Rik
arneson-industries.com
Offshoreonly Advertiser
 
Rik's Avatar
 
Join Date: Jan 2001
Location: California
Posts: 2,782
Likes: 0
Received 5 Likes on 5 Posts
Default
Originally Posted by whataride
Can someone explain what is actually involved in changing from a Bravo Xr with ITs to a Arneson ? Does the transom assembly / motor ..etc need to come out ?? Is a transmission required ??
You need to remove your engine in order to remove the Bravo Gimbel and transom assembly, engine bell housing and drive plate.

All the parts needed to replace it are included in the Arneson kit including transmission.
__________________
Arneson Surface Drives www.arneson-industries.com
Rik is offline  
Reply
Old 12-08-2010, 09:17 PM
  #59  
GLH
Platinum Member
Platinum Member
 
GLH's Avatar
 
Join Date: Dec 2002
Location: Burlington, VT
Posts: 15,272
Received 19 Likes on 13 Posts
Default
If you want to keep it 20 years Arneson.

If you want to sell it one day, #6.
GLH is offline  
Reply
Old 12-09-2010, 05:34 PM
  #60  
Registered
 
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like on 1 Post
Default
Originally Posted by Jeff P31
They should have made them all with single engines !!!!! Rode in 1 with twin 500efi engines and it was the illest handling thing I ever rode in . And no it was not the guy driving either.
Just curious. What was top end on that setup? 80-85?
A.O. Razor is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.