Offshoreonly.com
Page 9 of 22
« First
7
8
9
10
11
19
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   What Drive? (https://www.offshoreonly.com/forums/drives-lower-units/253814-what-drive.html)

Rik 08-02-2011 11:05 AM
From the photo perspective, kinda an optical illusion

kjm5125 08-02-2011 06:39 PM
Originally Posted by A.O. Razor (Post 3467657)
Looks sweet.

Rik. Are the extension boxes supposed to sit below the notch? It looks like they do.

More than an inch above.

A.O. Razor 08-02-2011 07:41 PM
Originally Posted by Rik (Post 3467885)
From the photo perspective, kinda an optical illusion
Originally Posted by kjm5125 (Post 3468270)
More than an inch above.
Ah, thought so.

Any idea about what kind of props you will run?

kjm5125 08-02-2011 08:36 PM
Hering-17x31

UrbanDisturbance 08-03-2011 06:53 AM
Originally Posted by kjm5125 (Post 3468393)
Hering-17x31
4 or 5 blades? What horsepower do you have? I'm curious, as I plan on putting Arnesons on my 1994, single notched transom, 38ft Cigarette Top Gun in the future. It wieghts 11,500lbs dry. I have one ASD7M drive in the Garage, just saving up for the 2nd. Can't wait to see your results. Don't forget to show some video when you go out!

kjm5125 08-03-2011 08:13 AM
Originally Posted by UrbanDisturbance (Post 3468625)
4 or 5 blades? What horsepower do you have? I'm curious, as I plan on putting Arnesons on my 1994, single notched transom, 38ft Cigarette Top Gun in the future. It wieghts 11,500lbs dry. I have one ASD7M drive in the Garage, just saving up for the 2nd. Can't wait to see your results. Don't forget to show some video when you go out!
5 blade Herings, stock 575's with coolers, hp 625-650 estimated

More pictures and video to come.

kjm5125 08-08-2011 07:42 PM
2 Attachment(s)
A few more pictures. The transom cleans up real nice!
I went with the Hardin Strainers from CP Performance.

The end is very near!

kjm5125 08-08-2011 07:45 PM
XR gear
 
4 Attachment(s)
These picture is why I decided to go with Arnesons. This was the worst of the gears.

A.O. Razor 08-09-2011 05:17 AM
Looking good

Originally Posted by kjm5125 (Post 3473213)
These picture is why I decided to go with Arnesons. This was the worst of the gears.
:eek::eek::eek:And why every hi-po B1 owner should consider it. Over time, that is money out the window right there.

Are you running 1,56 gears in the arnies? I assume you ran 1,5 in the B1's. What pitch/rpm/speed did you run with the B1's?

Looking forward to see some numbers.

kjm5125 08-10-2011 06:59 PM
1.56 gears in the Arnesons and 1.5 in the XR's. I was running 5 blade Hydromotives - 15-1/2 x 29 (P-5). The best speed was 83.1 GPS @ 5,300 rpm's.


All times are GMT -5. The time now is 04:18 PM.
Page 9 of 22
« First
7
8
9
10
11
19
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.