i am installing a 1 in spacer on my bravo drive can someone give me directions and any help would be appreciated. do i use thread lock, how do i get studs in all the way?

use blue,medium strength locktite,and a stud install/remove tool,pretty easy job.

Yes use threadlocker, You can jam 2 nuts together & tighten the studs that way or there is a stud installer-remover kit that grips the stud with 3 rollers I have used them for years on exhaust studs & they dont mess up the threads. Dont forget the o rings on the drive and the spacer. Randy

Go ahead and buy a Snap-on stud extractor. I went through all types of knock-offs when trying to remove some studs with limited clearance. It will be the last one you buy...