volvo to BW velvet drive
#2
Registered
iTrader: (1)
You need a flywheel housing adapter and dampener for Velvet Drive. I think the TAMD63 is SAE 3, but not positive.
http://www.surplusman.com/Detail.php?itemid=3454
I would not run the stock Velvet Drive, It would need to be upgraded to handle the torque of that engine.
http://www.surplusman.com/Detail.php?itemid=3454
I would not run the stock Velvet Drive, It would need to be upgraded to handle the torque of that engine.
Last edited by Biggus; 05-21-2012 at 04:26 PM.
#3
Registered
Thread Starter
Join Date: Nov 2011
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
oh i see would it have more torque than my offshore 454?
i thought i was going down in power seems like i was a bit off the mark.
the engine comes with a ZF 220A but i dont think that will hook up to the TRS
i thought i was going down in power seems like i was a bit off the mark.
the engine comes with a ZF 220A but i dont think that will hook up to the TRS