Offshoreonly.com
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Imco SCX new lower? (https://www.offshoreonly.com/forums/drives-lower-units/297190-imco-scx-new-lower.html)

skydog 03-09-2014 10:09 AM
Originally Posted by GAZ (Post 4086517)
No B/S here. My boat I lost maybe 2mph. I'm NA 500efi at 7500 msl . went from 55mph to 53 mph. GPS. Running the same prop. So if they are loosing that much mph sounds suspicious. Post 7 of that thread sounds like the drive they have didn't come direct from IMCO and maybe the ratio is off. I don't know. I'm just saying at my speeds it was barely noticeable. And I will take that loss for no broken drive.
Very glad to hear this!! :-) :-)

Uncle Dave 03-09-2014 10:42 AM
Im wondering if a Rem polish on the gear might bring back some of the loss.

UD

Quinlan 03-10-2014 08:00 AM
1 Attachment(s)
[ATTACH=CONFIG]520044[/ATTACH]


I might have lost a couple also.

Whole season without breakage---- Priceless!!!!!

Not that I am Hard on them!

MarkDonzi 03-10-2014 05:40 PM
Originally Posted by Quinlan (Post 3933434)
These are my new ones. Not sure how different they are and they have NOT been wet yet - Damnit man
Thode look sweet, let us know how they run!

575cat 03-10-2014 05:52 PM
Originally Posted by Quinlan (Post 3933434)
These are my new ones. Not sure how different they are and they have NOT been wet yet - Damnit man
Those are standard SCX , those and the -4,s also have very thick skags .definitely a better shape .

Quinlan 03-11-2014 05:27 PM
Originally Posted by MarkDonzi (Post 4087453)
Thode look sweet, let us know how they run!
Ran all last year without missing a beat!

575cat 03-11-2014 09:40 PM
I have a pair of SCx-4,s in the classified,s if anyone is interested . I have 1 and 2 inch spacers available for sale also .

Cobra100+ 03-12-2014 06:06 AM
I ve been looking for a nice low hour pair of SCXs, don treally need the -4s but I will check them out.

drpete3 03-12-2014 12:21 PM
Originally Posted by Quinlan (Post 4088108)
Ran all last year without missing a beat!
What kinds power you putting thru them? How much speed loss did you see and since they are -2 did you porp shaft height change?

Quinlan 03-17-2014 08:14 AM
Right at 750 hp. I have Stellings and I installed 1" spacer to lower a little.
I might have lost 2 to 3 but Top End is Not my pursuit. ALL summer NO issues IS.

Totally satisfied. Well except for the Hinge pins screws--- Note to Self- Check tq regularly!!!!.


All times are GMT -5. The time now is 08:49 PM.
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.