Flat Deck Russ

Anyone take one of these apart? How tough is the spring?
Both of my drive indicators only come out about an inch.
I did a search but did not find anything about taking these apart. I want to do so to see if they are fould or do I need cables.

Griff

They are simple to take apart and put back together. You most likely just have some build up or sand inside the tubes.

97FASTech

iTrader: (6)

Cleaned mine up, but was still the cable.

[ATTACH=CONFIG]505903[/ATTACH]

[ATTACH=CONFIG]505904[/ATTACH]

kmeyer64

C P has cable

phughes69

These are the types of cables I bought. I purchased new throttle, shift and tab cables for mine and my parents boat. (8 cables total) They are really good quality and a very good price. I think Rookie on here uses the same cables and he was the one that set me onto the Pretech brand.

http://www.ebay.com/itm/PRETECH-33C-...item2a075216b1

Flat Deck Russ

Thanks for the heads up on the cables. Too bad they are black, would have to change them all out.

DiamondPerformance

iTrader: (2)

They don't make the red jacket cables anymore. New cables are black or blue .

motor

iTrader: (3)

They may not make them red any more ...(I didn't realize that) but there are plenty of red 33c cables still out there