Go Back  Offshoreonly.com > Technical > Drives and Lower Units
Need to install an ITS yoke on an IMCO Extreme SC drive >

Need to install an ITS yoke on an IMCO Extreme SC drive

Like Tree1Likes
  • 1 Post By Griff

Need to install an ITS yoke on an IMCO Extreme SC drive

Reply

Old 03-20-2018, 07:25 PM
  #1
Registered
Thread Starter
 
Join Date: Nov 2002
Location: Panther Ridge Florida
My Boat: Alot of them
Posts: 99
Default Need to install an ITS yoke on an IMCO Extreme SC drive

So apparently the cross and bearing size on the IMCO is too small to fit the ITS yoke.
Has anyone found a way around this problem, short of taking the drive apart?
Thanks for any help!
Speed H2O is offline  
Reply With Quote
Old 03-21-2018, 01:47 AM
  #2
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha
My Boat: .......32............. ............Active Thunder....
Posts: 16,494
Default

Possibly try and find a combo U-Joint
Speed H2O likes this.
Griff is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


OSO Sponsor
OSO Advertiser
OSO Advertiser
OSO Advertiser