installing Bravo Transom
05-01-2021 | 07:32 PM
#11
Registered
Joined: May 2009
Posts: 1,941
Likes: 526
Tape up both sides of the holes. the holes get filled from the inside with a syringe poked thru the tape and soak for about 10 minutes.
it's overkill but peace of mind i guess.
your transom is already cut right ? your other thread sounds like a bilge and transom assembly freshen up
I removed the tiller and didn't need to cut the notches for it.
Last edited by outonsafari; 05-01-2021 at 07:36 PM.
