bravo III question
06-20-2023 | 02:16 PM
#11
Registered
Joined: Nov 2009
Posts: 4,198
Likes: 500
From: KY
Mine would be to high, yours should have come with 30/23 uppers and 16/27 lower gears
Mine was a XR B3 and said to be 1.81 but XR only comes with 19/16 uppers, so closest to the 1.81 was most likely 15/19 which would be used for the 1.50 drive ratio
Mine was a XR B3 and said to be 1.81 but XR only comes with 19/16 uppers, so closest to the 1.81 was most likely 15/19 which would be used for the 1.50 drive ratio
06-20-2023 | 02:45 PM
#12
Registered
Joined: Nov 2009
Posts: 4,198
Likes: 500
From: KY
Rotated the upper and counted rotations of both, 10 upper/7.25 lower 10/7.25= 1.379
Believe mine is a 18/25 25/18 = 1.38 making it for a 1.65 drive using upper of 32/27 only one with that ratio
Other lowers are 15/19 = 1.27 , 16/27 = 1.68 , 13/24 = 1.85
Believe mine is a 18/25 25/18 = 1.38 making it for a 1.65 drive using upper of 32/27 only one with that ratio
Other lowers are 15/19 = 1.27 , 16/27 = 1.68 , 13/24 = 1.85
