SmartCraft Fuel 2
10-24-2016 | 06:50 AM
#1
Thread Starter
Registered
Joined: Oct 2016
Posts: 17
Likes: 1
From: Monza Italy
SmartCraft Fuel 2
Good morning
I own a Mercruiser 6.2 MPI, after mounting the electrical system, and mounted indicators smartcraft fuel 1 and 2 fuel, I realized that the original engine in the plant is not scheduled line for the fuel sender 2.
Do you have ideas to solve this problem?
Thank you
I own a Mercruiser 6.2 MPI, after mounting the electrical system, and mounted indicators smartcraft fuel 1 and 2 fuel, I realized that the original engine in the plant is not scheduled line for the fuel sender 2.
Do you have ideas to solve this problem?
Thank you
10-24-2016 | 12:16 PM
#2
Gold Member
Joined: Oct 2000
Posts: 5,664
Likes: 140
From: Hollywood, MD, USA
How many fuel tanks do you have? If you only have one, you configure tank 1 and set tank 2 to "Not Installed. Also, you can do a master reset on the gauges and set everything back to the factory settings.
