Softwareupdate Vesselview 1.5
06-25-2017 | 03:28 AM
#1
Thread Starter
Registered
Joined: Sep 2010
Posts: 69
Likes: 0
From: Rüdesheim am Rhein /Germany
Softwareupdate Vesselview 1.5
Hi,
My vv crash after a few secounds runtime.
The first 5 secounds my vv works great then the Display freeze .
Ater a reset it works again for 5 secounds.
It startet after i have select a wrong engine in the settings.
The 5 secounds are not enough to change it to the right engine.
So i am hoping that a new Software can fix it.
Annyboady know how to make a update and have the Software.
Thanks
Christian
My vv crash after a few secounds runtime.
The first 5 secounds my vv works great then the Display freeze .
Ater a reset it works again for 5 secounds.
It startet after i have select a wrong engine in the settings.
The 5 secounds are not enough to change it to the right engine.
So i am hoping that a new Software can fix it.
Annyboady know how to make a update and have the Software.
Thanks
Christian
05-22-2018 | 03:50 AM
#2
Registered
Joined: May 2018
Posts: 1
Likes: 0
Vessel View 1.5 freeze
Hi Christian,
I just found your post looking for the solution for the same problem I have experienced. I was trying to install a new device and probably had some previous setting which makes it freeze after about 5 sec which is not enough time to go to factory reset option.
Did you manage to solve the problem and how?
Regards,
Dragan
I just found your post looking for the solution for the same problem I have experienced. I was trying to install a new device and probably had some previous setting which makes it freeze after about 5 sec which is not enough time to go to factory reset option.
Did you manage to solve the problem and how?
Regards,
Dragan
