Shueman?
#1
Registered
Thread Starter
Join Date: Mar 2008
Location: Tulsa, OK
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Shueman?
Do you know generally what speeds the eagle 25 hull will start to chine walk at? I know it varies greatly, but mine is a factory rigged install, so i'm sure it was done right..Will the tabs truly help or is it just gonna be unstable around 80? Design limitation?
Thanks!!
Thanks!!
#2
Registered User
VIP Member
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Do you know generally what speeds the eagle 25 hull will start to chine walk at? I know it varies greatly, but mine is a factory rigged install, so i'm sure it was done right..Will the tabs truly help or is it just gonna be unstable around 80? Design limitation?
Thanks!!
Thanks!!
#3
Registered
Join Date: Jun 2005
Location: IL
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
85-90 ours started to chine top speed was 108mph was alot to handle.You need to learn to balance it if you look at the rear of the boat it sits on a 5 inch flat pad and at speeds you blalance it there.
#4
Registered
Thread Starter
Join Date: Mar 2008
Location: Tulsa, OK
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Cool
Thanks for the info. I cant imagine an eagle running 105, it would HAVE to be squirrely as heck!!
I'm gonna check my steering over really close, I think it might have some play in it. I have the dual ram add on, and there is a little delay in it, plus I think the steering effort is too high i think.
I'm gonna check my steering over really close, I think it might have some play in it. I have the dual ram add on, and there is a little delay in it, plus I think the steering effort is too high i think.