Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Eliminator (https://www.offshoreonly.com/forums/eliminator-35/)
-   -   2007 Daytona (https://www.offshoreonly.com/forums/eliminator/235517-2007-daytona.html)

DonRoc 07-27-2010 07:43 PM

How do they handle @ 125+?

22 DAYTONA 07-28-2010 01:44 PM

The 27 is very stable at those speeds. You do need to watch the water for side rollers but you need to do that in every boat. My 22 Daytona ICC has run 127 and it is also super stable. That is my buddys boat in the picture. I can out drag race him easily but when the water gets rough, he is gone. Are you going to do your own wrenching? I have someone close to you who might be a buyer on the Illmore and could do the complete transformation. He is a Eliminator dealer and very experienced in the high performance side.
Give me a call 903-738-2007 Mitch
Here is a pic of my 22 speedo and a video of the speed on my 100mph speedo. I think mine is the fastest new 22 that has been built.

http://www.performanceboats.com/html...m/DSC01083.JPG

The video of acceleration on the 100mph speedo

http://www.youtube.com/watch?v=HqfY5Z2WBWo


[yt]HqfY5Z2WBWo[/yt]

DonRoc 07-28-2010 03:25 PM

I own Glen Harbor Marina, and will do my own work. I may want to sell the Ilmore. I will give you a call.

ShadBurke 07-28-2010 10:26 PM


Originally Posted by DonRoc (Post 3170021)
I own Glen Harbor Marina, and will do my own work. I may want to sell the Ilmore. I will give you a call.

$12-$15k for the imor complete with headers. Probably not the answer you want to hear but that is what the last two here in So Cal have sold for. they had about 120 hours on each motor.

DonRoc 07-28-2010 10:44 PM


Originally Posted by ShadBurke (Post 3170423)
$12-$15k for the imor complete with headers. Probably not the answer you want to hear but that is what the last two here in So Cal have sold for. they had about 120 hours on each motor.

I am most likely better off keeping the motor and seeing what happens with the economy. I might be better off selling the motor locally and doing the install. I am trying to justify buying another toy and trying to sell off the parts to make it work with little out of pocket. I should know better..

skydog 08-10-2010 09:24 PM

Just got a 27 with a 600 Merlin 1071 blower 1000HP, 1st owner ran 128MPH. I will soon know my self, still going over every thing. Way to much money not to know the boat inside and out.

Skydog

zx14 08-10-2010 10:02 PM


Originally Posted by 22 DAYTONA (Post 3168976)
08 27 Daytona ICC. Teague 900. First pass off the trailer when new. It has run faster since then but I do not have a picture.

http://www.performanceboats.com/html...m/IMG_3288.JPG

WHAT PROP AND GEARS YOU RUN?

DonRoc 08-11-2010 07:56 AM


Originally Posted by zx14 (Post 3179693)
WHAT PROP AND GEARS YOU RUN?

http://www.eliminatorboat.com/files/104_pbm_june.pdf
Here is a article showing about that speed with same motor and a labbed 32. I think the boat had some people in it too. i wish the article went into a little more detail.
Does anyone have a cabin shot? Is there any room in there at all or just storage?

zx14 08-11-2010 11:53 AM

sounds like I have an issue or was lied to. I run a labbed 32 bravo prop on a imco shorty,"gears unknown" with what I was told a 500 efi converted to a 540 cu. in. with a procharger pushing 8lbs with 60 lb injectors, was told the motor was 960 HP. 5800 rpms gets me 98 MPH, 4 people on board with half full of fuel.

22 DAYTONA 08-11-2010 01:20 PM


Originally Posted by zx14 (Post 3179693)
WHAT PROP AND GEARS YOU RUN?


Teague 900, Teague platinum drive 1:36 gears, Teague Bravo 33.
The platinum drive comes as a shorty.


All times are GMT -5. The time now is 06:53 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.