1999 22' Daytona porpoise
08-02-2011 | 06:33 PM
#11
Registered
Joined: Mar 2004
Posts: 2,697
Likes: 93
From: Pa
You might check out the drive heigth on this one to compare. http://cgi.ebay.com/ebaymotors/07-EL...rQ5fMotorboats
08-02-2011 | 06:38 PM
#12
Registered
Joined: Jun 2001
Posts: 2,303
Likes: 109
From: McHenry, Illinois
Talk to the previous owner and Eliminator before you start making changes. It might be possible you are not using enough up trim. Let it pack air. Make sure you are driving it correctly before spending money.
09-02-2011 | 12:21 PM
#13
Registered
Joined: Oct 2004
Posts: 1,499
Likes: 48
From: Newbury Park, CA
09-24-2011 | 02:10 PM
#14
Registered
Joined: Jan 2003
Posts: 167
Likes: 0
From: Lawrenceburg, Indiana
22 hopps
I had a 22 that was out of control over 80....Brent at eliminator told me the fix...tunnel extentions with a couple degrees down angle. This is common to many 22s and getts worse with more power. I could not drive it once I put a blower motor in......ON RAILS after the extentions. PM me your number and i will get you the details. They are a simple build from aluminum plate and flatbottom style hardware.
Last edited by greencard; 09-24-2011 at 03:14 PM.
