30ft Cat 1984 race boat Info
#11
Registered
Cool looking ride, check with Raymond Robert @ Double RR Performance the boats I have seen come from him and his painter look really good. Good luck with your Cat.
#12
Registered
Thread Starter
Join Date: Oct 2006
Location: Belleville,Ontario
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
In the water for 2007
Here are some in the water pics. Still a lot of work to do but at least we are boating.
Last edited by Hunterhunter111; 08-09-2007 at 05:11 PM. Reason: wrong link
#14
Registered
Thread Starter
Join Date: Oct 2006
Location: Belleville,Ontario
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I don't know what the top end is yet but we are doing 71-72 in the pictures. This is only the third time I have had it out and I am still learning to drive (trim angle, rpm,3ft chop,etc).
It does like large chop though, I had it airborn at 50mph running with the waves this weekend and yes we did get wet
but had lots of fun.
It does like large chop though, I had it airborn at 50mph running with the waves this weekend and yes we did get wet
but had lots of fun.
#16
Registered
Thread Starter
Join Date: Oct 2006
Location: Belleville,Ontario
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Active cat with kammas top speed
What kind of engines did you have .What gearing,props and finally
what was your average top speed. I am running 1.53 ratio 502 tranys with 13% overdrive with 23 pitch props X 17 inch diameter and I hit the rev limiters at 6000 . My engines are 454 ls6s with 10 to 1 compression rollerized,gill manifolds with dry exhaust been modified to look wet.(noise rules). I have just installed 27 pitch X17.5 props but haven't had it in the water to test yet.
what was your average top speed. I am running 1.53 ratio 502 tranys with 13% overdrive with 23 pitch props X 17 inch diameter and I hit the rev limiters at 6000 . My engines are 454 ls6s with 10 to 1 compression rollerized,gill manifolds with dry exhaust been modified to look wet.(noise rules). I have just installed 27 pitch X17.5 props but haven't had it in the water to test yet.