I didnt measure but the outer fiberglass is 1/2, then it had 2 sheets of 3/4 plywood, and then after that a thin layer of glass over that. So I would say atleast 2 1/4in thick.
I just picked up a sheet of plywood and have to still get some resin, roven woven mat, etc. I will be getting a hand from 2 members on here since this is my first time. I would like to get the transom finished before the real cold weather hits us, then its time to build a new motor and buy much need parts....
Erik

I dont see you ditching work or training to lend a helping hand punk
Its ok this weekend its game on if I get all the material, come on over if you feel like it. Oh yeah we are going out on Friday night for a drink! You and Sherry should join us
Man this is going to be one long winter!
Erik

yea ill call you about tonight!!!!

Well little update..
Was able to cut both sheets of 3/4 plywood to fit in the boat nice and tight today. Then expoxy both sheets togeather outside the boat. They are drying tonight and maybe tomm will get it set in the boat and drill some holes to hold it tight to the back of the transom.
Oh big thanks to my buddy John "johnlx302" for helping me out today!
Erik





It maybe hard to read but John wrote a little note for the new transom..(perpare for an asskickin)

Looking good Erik. if you need an extra hand let me know.

Thanks Ian, hey i dont have your number if you want pm me your number.
Erik

Update

Plywood is fitted and made up some wedges for the new stringers. Ran out of daylight and temp to glue the wood to the fiberglass.

p:p:p:

Skeet Skeet Skeet..
Updates soon i hope, once I start to feel better