29 Extreme Pleasure Deck Mold is Born !!!
Subscribeand no, the floor of the cabin is not uneven, that's water in the floor from some of our GREAT weather we have been having......
Dave
DaveDave,
Question for ya,.......... I seen fuel tanks installed a few different
ways. This is the first I've seen with the glass bonded to the
aluminum.
1) Do you have any problems with the Glass letting go of
the aluminum?
2) Do you inject / float the tank in foam for full support?
Thanks
Cougarman
Question for ya,.......... I seen fuel tanks installed a few different
ways. This is the first I've seen with the glass bonded to the
aluminum.
1) Do you have any problems with the Glass letting go of
the aluminum?
2) Do you inject / float the tank in foam for full support?
Thanks
Cougarman
Cougar, We rough up the aluminum with a grinder so the resin sticks. After the tank is layed in place we pour foam around the tank. Then glass over it. Dave
Hey Mike, It's down at Lee's @ Premier Interiors getting the interior installed. Then it goes down to Grant's shop to be rigged. Hopefully after the first of the year it be be ready. And i'm still waiting for the Concept to pull up at the dock....my Grouper poles are ready !!!!
Dave
DaveMike, I love the 36 Concept better than any other Performance CC boat I have seen. I'm still hoping to get a 36'-39' Extreme CC out. I am trying to put some ideas together for the tooling of the deck. I want a enclosed head in the console along with a cabin about the size of your 36. It's just VERY expensive for the base tooling.
The blue boat is inside and I am not sure how far they are with it. I am going back down Wednesday and i'll check for you. Lee's not the fastest but he is one of the best. Dave
The blue boat is inside and I am not sure how far they are with it. I am going back down Wednesday and i'll check for you. Lee's not the fastest but he is one of the best. Dave
Interior is geting installed as we speak, dash is being layed out and completed. It's getting closer. First pic is of Grant's shop, Grant's Custom Rigging and the second is of the dash gauge lay out. No we are not using pink bezels......it's only a lay out.
The dash will be blue carbon fiber with chrome gauges with platinum faces. I'll update as it gets finished. Dave
The dash will be blue carbon fiber with chrome gauges with platinum faces. I'll update as it gets finished. DaveHere is the rear hatch logo and the seat type. (The yellow ones). Also the side coming pads being built. Dave Warden









