29 Extreme Pleasure Deck Mold is Born !!!
#22
Registered
Thread Starter
Join Date: Nov 2001
Location: Palm Harbor, FL
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Here's a hull being built. Notice the Kevlar in the sides and the black area in the hull where the motor sits. That is Carbon Fiber !!! Dave Warden
#25
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Ok, let me make sure I'm talking to the right guy...are you the fellow that was racing with Steve Miklos for the past couple of seasons? If so, I thought you guys were running a Phantom hull. Is the 29 meant to improve on that hull? If so, then I have to ask HOW? Looks like there isn't much room to improve on based off your record.
#26
Registered
Thread Starter
Join Date: Nov 2001
Location: Palm Harbor, FL
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Cord - That was Gary Deciucies that drove for Steve. NO that was NOT a Phantom. 100% Extreme. The new 29' open boat was designed to run in Factory 1 class. Gordo and Gary will be racing this boat this year. Dave
#30
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Could you please detail how the boat is put together? I'd like to see the installation of the bulkheads etc. Laying up a hull is something that I'd like to do someday...