How I use Leverage Polish & Oxidation Remover
#11
Registered
Thread Starter
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
#12
Registered
Thread Starter
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Donnie
#13
Registered
Well, this certainly isn't one of the half-million dollar rides that Donnie keeps looking so great, but I must say I am really happy with the results I've seen with Leverage. BlackJack had a pretty nice shine to begin with, but the Leverage really pumped up this 21-year-old Imron finish like nobody's business.
Donnie - I was half-joking about the spray top, but I will PM you with my home address to get one that goes with the bottle, the one I took off an empty bottle clogged, so maybe I'd do better with one of yours. Thanks for this great product - and all you do to keep our boats looking great!
Donnie - I was half-joking about the spray top, but I will PM you with my home address to get one that goes with the bottle, the one I took off an empty bottle clogged, so maybe I'd do better with one of yours. Thanks for this great product - and all you do to keep our boats looking great!
#16
Registered
Donnie, finished the boat late on Sat. and once again Leverge is a great product. I only used the polish I used 3m compound very messy. I will be reordering the compound and polish I still can not believe how easy it comes off.
Thanks for a great product.
mark
Thanks for a great product.
mark
#17
Registered
I used the oxidation remover on my boat last year. I didn't have good luck with it. I used the wool pad as recommended, and i have the harbor freight buffer. I found that i had a hard time getting the OR to com off, never really seemed to dry and was always hazzy. Maybe i did something wrong, not sure. I do like the polish but am undure about the OR.
#20
Registered