New Exhaust Finally Working!
08-13-2006 | 09:04 PM
#11
Registered
Joined: Oct 2001
Posts: 149
Likes: 1
From: Cayman Islands
Re: New Exhaust Finally Working!
Formula1, any photos of the install? As far as whether they are gen II or gen III you can tell by the shape of the end riser where it mates to the manifold, the II's have a round riser (stainless) and the III have an oval shape (alluminium - I think).
08-13-2006 | 09:12 PM
#12
21 and 42 footers
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Re: New Exhaust Finally Working!
[QUOTE=dgduck13]
These are on 500EFI's so the intake is different...probably could be changed easily. I was hoping to get $5k for both sets this October but they will probably go for less.
Originally Posted by formula1
Maybe you could interest dgduck13! He's got a 382 with 502 MPI's. I'll put in a good word for ya!
QUOTE]
I would like to do something like that, but right now I just don't have the money to play with the big boys....... So, for now I will just stay in the slow group!
Don
QUOTE]
I would like to do something like that, but right now I just don't have the money to play with the big boys....... So, for now I will just stay in the slow group!
Don
08-14-2006 | 09:54 AM
#14
Registered
Joined: Jul 2005
Posts: 566
Likes: 1
From: Chesapeake Bay
Re: New Exhaust Finally Working!
formula1,
Glad to hear your back in the water and she's running well. Now you just have to get those stainless thermostat housings and you'll be to good. Post up some pics of the exhaust.
Glad to hear your back in the water and she's running well. Now you just have to get those stainless thermostat housings and you'll be to good. Post up some pics of the exhaust.
08-14-2006 | 02:32 PM
#15
Thread Starter
Registered
Joined: Apr 2001
Posts: 935
Likes: 0
From: Southwest, FL
Re: New Exhaust Finally Working!
I'll try to get some pics of the new install next weekend when I get her out again.
Treads, thanks for all the helpful links for the t-stat housings! I will have a couple of those here soon...as soon as I recover from the exhaust expediture!
I might even copycat ya with the K&N breather setup with the chrome uppers! 
CayFormula, they must be Gen II's because they have the round riser base.
Thanks again for the help! Ya'll are great!
Treads, thanks for all the helpful links for the t-stat housings! I will have a couple of those here soon...as soon as I recover from the exhaust expediture!
I might even copycat ya with the K&N breather setup with the chrome uppers! CayFormula, they must be Gen II's because they have the round riser base.
Thanks again for the help! Ya'll are great!
