382 Fastech - how to remove the stereo????
#1
Thread Starter
Gold Member
Joined: Feb 2003
Posts: 310
Likes: 0
From: Carlsbad, CA
I give up....how do you get the stereo head unit out.....I can't do it and I've taken half the cabin apart. What's the trick?
2001 382 with Kenwood stereo (which stopped working). Thanks.
2001 382 with Kenwood stereo (which stopped working). Thanks.
#3
Seriously, I think if you take the trim plate off, there is a small latch on each side of the radio that accepts a Kenwood stereo removal key. There may be one secured somewhere inside the port closet ...?
I may still have one around, but I changed to a Sony head unit.
#5
Yep - Daryl Johnson is your man. Helped me with a TV/VCR refit that was a total mystery until he got involved. It all has to do with keeping fasteners out of sight for that clean look....
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#6
Registered
Joined: May 2007
Posts: 1,147
Likes: 1
From: PA
After you take off the bezel, you gotta press out the two locking tabs on either side that keep it from moving around. A two thin flat head screw drivers or pick tools should do the trick. Or you can just contact tech support, they'll guide you through the entire process.
#7
Thread Starter
Gold Member
Joined: Feb 2003
Posts: 310
Likes: 0
From: Carlsbad, CA
This ain't workin...I talked with Daryl at Formula and he thought I needed some keys to take it out but also thought a butter knife would work....nothing is working. Here are some pics with the trim ring removed.... Do these pics look familiar to anyone? Help.
#9
Not sure that is a factory-installed unit. Looks like someone else cut out the panel. Any possibility of contacting the previous owner or locating a installation and/or service manual for the head unit?



