Not too bad until I actually conjure up the graphic of you poking around in your dog's chit looking for bird parts.:eek:

5PM is real good at stirrin' up chit so it would hold he would be an expert at poking around in it.

Sorry to hear Bucky chit himself, maybe he and Axa can swap stories this weekend :o.
Do think I'll pass on that session though.

everyone will be happy to know got all back in order today, even some bilge cleaning, and a good canvas rinse and had a super-nice afternoon out on the River.

plan on being around again tomorrow, Thurs...

will call shortly Jeff

is was nice to get back to the boat, been a little busy

this project: http://www.offshoreonly.com/forums/s...d.php?t=192374

the corolla has all new rear brake lines from the master cyl. back

I had a faaart and hit something I know all about with the mower deck and bent an arbor housing all to h&ll- the shaft and bearing were fine, amazing considering the hit. It was steel hit it with the center blade-stoped cold- even tweaked the arbor flange on the deck, and this isn't lightwieght stuff.
It hopped the belt in the deck...the shaft drive never missed a beat
I need to mow this place...when it's not raining!

Throw a couple days a week at work in there...

I've been out straight. :grinser010:



look forward to meeting you in person tomorrow Jeff.

'Bird, you got Dexter 12x2 surge drums on your trailer?

I've got 6 new wheel cylinders that RedDog382 sent me gratis :ernaehrung004: that he couldn't use after Kodiak-ing
Now niether can I. :)
I have six good drums and thier matched bearing sets. I numbered everything together. The bearings and races are excellent not a mark on either/any. Seals gone of course.

the assemblies themselves can be scalped for hardware and backing plates- the existing shoes and wheel cylinders are beat.

If you can use the stuff for spares ect. yours for the taking first
or anyone else?

otherwise they go to scrap/junk

with scrap prices where they are they should be worth at least 20 bucks or a bar tab:drink:

in scrap metal at the tranfer site...

these are kinda hard to disguise in a garbage bag.

20+lbs. a piece.

Driftin' or Drivin' ?

For some reason....BBlades sent me a set of Turbo's. They seem to be of the 30" pitch and labbed? Anyone?

Dave

Dave
Keep the cool boxes that they come in and send me over the blades..I will give them a try..Some one was telling me you were missing a pair of the shipping boxes..:drink: