Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   382 Fastech Engine/ Drive Packages (https://www.offshoreonly.com/forums/formula/189158-382-fastech-engine-drive-packages.html)

t500hps 06-23-2008 07:31 AM


Originally Posted by Venomous (Post 2598373)
Next question.

What is the length of the 382 on a trailer? I'm guessing 45 feet and height less than 10 feet.

Thanks guys.

very close.....my aluminum trailer was over 45 but I was able to cut some of the tongue out of it to get it below 44....a steel trailer could be a little shorter still. The windshield is probably about 9 feet but not over 10.

PhantomChaos 06-23-2008 11:14 AM

My boat is the same size on the trailer. :)

t500hps 06-23-2008 11:56 AM


Originally Posted by PhantomChaos (Post 2598715)
My boat is the same size on the trailer. :)

Ha Ha....what about after a couple beers???? :drink:

rjr 07-01-2008 02:22 PM

500 EFI's come with a warranty. I understand the others don't. My 500's are still purring with 550 hours, but I almost never run above 3500 RPM

Mackattack 07-01-2008 08:18 PM

My trailer has drive guard, and is 46' long from tongue to guard, just fits in a 50' building with 4' work bench.

2001 500 efi, xz drives, getting 51 mph @ 3500, 68 mph @4700, need to get props labbed to get to 52-5400 rpm

Love the gen, cabin is at 70 degrees if I can keep it under 40 mph

J.B. Marshall 07-01-2008 08:43 PM

Mack what size prop are you spinning, my guess is 30's?

t500hps 07-01-2008 08:53 PM


Originally Posted by J.B. Marshall (Post 2609954)
Mack what size prop are you spinning, my guess is 30's?

I would guess 30's too.....and they are too big!!!! ...but I seem to remember him saying he was spinning 28's.

With my built motors I spin 30's.....3,500 at about 51 GPS, and max of 5,500 rpms in the low 80's.


All times are GMT -5. The time now is 06:34 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.