Outdrive Issue

Reply Subscribe

Thread Tools

04-19-2011 | 02:31 PM

#11

1MOSES1

Thread Starter

Registered

Joined: Jun 2010

Posts: 4,806

Likes: 891

Quote:

Originally Posted by mrfixxall

crack the lines at the pump, if fluid comes out of the lines and the drive goes down but you may have to push down on it them the problem lies in the pump,if its still stuck solid then their are issues with the rams..

good suggestion.

04-22-2011 | 05:05 AM

#12

jiffy292

Gold Member

Joined: Jun 2009

Posts: 546

Likes: 3

From: Ma

use jumper wire to jump pump to check i believe blue wire is up green is down

04-22-2011 | 11:01 AM

#13

sprink58

Registered

Joined: Jan 2011

Posts: 3,066

Likes: 8

From: Ocala, Fl

Not to be a $hit but did you check the fluid level

04-23-2011 | 11:51 AM

#14

1MOSES1

Thread Starter

Registered

Joined: Jun 2010

Posts: 4,806

Likes: 891

Quote:

Originally Posted by sprink58

Not to be a $hit but did you check the fluid level

hahaha i checked it. i have the recommended level.

04-23-2011 | 11:53 AM

#15

1MOSES1

Thread Starter

Registered

Joined: Jun 2010

Posts: 4,806

Likes: 891

Quote:

Originally Posted by jiffy292

use jumper wire to jump pump to check i believe blue wire is up green is down

that would make it a solenoid which i have kind of ruled out because the motor runs when i flip the switch. i havent tried the suggestion above yet because the weather has been rain everyday. i am suspecting it is the pressure relief valve. i doont think its holding pressure and its pissing the fluid back into the reservoir therefore i am not seeing a leak.