Go Back  Offshoreonly.com > Owners Forum > Formula
-2 shorties on a step 382 >

-2 shorties on a step 382

Notices
Formula

-2 shorties on a step 382

Old 04-16-2012 | 02:13 PM
  #1  
Thread Starter
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,755
Likes: 152
From: Connecticut
Default -2 shorties on a step 382

Has anyone run -2 shorties on a 382 w/o extension boxes? Putting 572's (700 HP) and IMCO SC's on a 1999 and was considering going with -2 lowers. Using 32P Maximus 5 blade props from Bblades.....anyone done this or something similar? Concerned about getting on plane but I think 5 blades will help.
kreed is offline  
Reply
Old 04-16-2012 | 06:01 PM
  #2  
axapowell's Avatar
Where To
 
Joined: Nov 2001
Posts: 2,517
Likes: 4
From: Alexandria Bay, NY 1000 Islands
Default

Of course I have a 353 with -2 Sportmasters on boxes with Maximus props.

Getting on plane with them was and still is not a problem, but I did space them back down 1/2" to reduce the slip up top. I am going another 1/2 this year for a total of 1" and see what happens.

I guess my point is, be prepared to shell out the dough for spacers to dial it in. At $1000-$1200 a set, tuning can get pricey. Dont forget drive oil too, last time i checked they weren't giving that away either. Just giving you the heads up. Good luck!

Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
axapowell is offline  
Reply
Old 04-16-2012 | 08:13 PM
  #3  
RedDog382's Avatar
Registered
 
Joined: Sep 2003
Posts: 3,029
Likes: 1
From: Toledo, Ohio/Las Vegas, NV
Default

I agree with Dave's post. Think you might be playing with fire and ending up spending a ton of money with not much in return. Formula spent a lot of time getting these dialed in, I wouldn't consider doing this on mine.
RedDog382 is offline  
Reply
Old 04-16-2012 | 08:54 PM
  #4  
t500hps's Avatar
21 and 42 footers
20 Year Member
Platinum Member
Super Moderators
 
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Default

Not the same thing but I can provide some info. I had a 2002 382 without boxes. I ran a set of 32 Bravos without much issue but tried a set of 32's that were 1/8 smaller in diameter and noticed issues when on plane in crossing winds. One prop would loose it's bite of the water and surge 200-300 rpms occasionally. That 1/8th inch made a difference and based on that I suspect a problem running 2 inch shorties unless they are full 15 5/8 Maximus.
t500hps is offline  
Reply
Old 04-17-2012 | 09:10 AM
  #5  
Thread Starter
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,755
Likes: 152
From: Connecticut
Default

Ok guys. Thanks for the input. I think Ill stick with what I got for now and see how the boat runs with the standard lowers first. Anyone have any speed estimates on my boat with 700'S ??? I know what Brett from Bblades told me it would run, but real world #'s are nice.

thanks again...
kreed is offline  
Reply
Old 04-17-2012 | 09:42 AM
  #6  
axapowell's Avatar
Where To
 
Joined: Nov 2001
Posts: 2,517
Likes: 4
From: Alexandria Bay, NY 1000 Islands
Default

Dialed in, I'll take a stab at it...87-91.

Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
axapowell is offline  
Reply
Old 04-17-2012 | 10:06 AM
  #7  
t500hps's Avatar
21 and 42 footers
20 Year Member
Platinum Member
Super Moderators
 
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Default

My 540's made 630hp/700tq full dressed on a dyno. 30P Bravos were the fastest (86-87@ 5,600) but I propped the boat for mid-range. 32P Bravos and those oversized Maximus I listed earlier ran 56-58@ 3,500 and 83@ 5,250.

Depending on whether 700hp being a dressed block or not you'll need 32P Bravos and should run over 90 under ideal conditions.
t500hps is offline  
Reply
Old 04-18-2012 | 09:13 AM
  #8  
Thread Starter
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,755
Likes: 152
From: Connecticut
Default

If it runs 90+ , Im a happy man....89 and lower....l, I'll have some tweaking to do. Brett at Bblades says mid 90's with his props, but I think thats kinda high. We'll see. He has my props now.
kreed is offline  
Reply
Old 04-18-2012 | 09:17 AM
  #9  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

you'll be just a touch faster than me....oh wait my gps said 68 not 86 lol
Unlimited jd is offline  
Reply
Old 04-18-2012 | 09:40 AM
  #10  
axapowell's Avatar
Where To
 
Joined: Nov 2001
Posts: 2,517
Likes: 4
From: Alexandria Bay, NY 1000 Islands
Default

Originally Posted by kreed
If it runs 90+ , Im a happy man....89 and lower....l, I'll have some tweaking to do. Brett at Bblades says mid 90's with his props, but I think thats kinda high. We'll see. He has my props now.

Brett is a great guy! He has done all of my prop work with very good results. You get what you pay for!

Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
axapowell is offline  
Reply

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.