Is it out there?
#41
Registered
Joined: Sep 2006
Posts: 4,002
Likes: 3
From: Tonawanda NY
heres another
http://cgi.ebay.com/ebaymotors/1989-...#ht_500wt_1182
http://cgi.ebay.com/ebaymotors/1989-...#ht_500wt_1182


just messing
#42
Thread Starter
Registered
Joined: Oct 2012
Posts: 99
Likes: 0
From: Cleveland, Ohio
#43
Registered
Joined: Sep 2006
Posts: 4,002
Likes: 3
From: Tonawanda NY
Don't worry my wife didn't like it either, be patient, yes its out there
#44
Registered
Joined: Jan 2012
Posts: 499
Likes: 0
From: Sunny Isles Beach,Fl.
Nice video of Formula 89 Boats
http://m.youtube.com/watch?v=JhUd77CZpRM
Love the 272 in it hahahahaha
http://m.youtube.com/watch?v=JhUd77CZpRM
Love the 272 in it hahahahaha
#45
Thread Starter
Registered
Joined: Oct 2012
Posts: 99
Likes: 0
From: Cleveland, Ohio
Nice video of Formula 89 Boats
http://m.youtube.com/watch?v=JhUd77CZpRM
Love the 272 in it hahahahaha
http://m.youtube.com/watch?v=JhUd77CZpRM
Love the 272 in it hahahahaha
It is pretty cool to see your boat in their original video! Thanks for sharing it.
OK....the color is starting to grow on me....a little.
#46
Thread Starter
Registered
Joined: Oct 2012
Posts: 99
Likes: 0
From: Cleveland, Ohio
My favorite color combo on these 272's is the red Imron painted hull and graphics from the 1987 model year. As luck would have I located one in northern IL for sale. After a lengthy phone call with the seller I ran up to check it out. Unfortunately, I returned again empty handed.
Both drives wearing along with I believe it would be the gimbal ring from side to side play. Sea water inlet hoses from drive up through gimbal area cracked and actually leaking. About 10 foot long and 2 inches wide area of the bow at the keel worn completely through and into the glass from beaching the boat. Bulkhead behind fuel tank from center stringer to port stringer was delaminated and glass broken through exposing wood (seller said he was "checking with a ball pein hammer")...ooof....bulkhead wood was soft. Both motors were quite wet with oil on the bottoms (pan areas). Deck stripes were worn through from buffing and or sun fading. Their were also a lot of petty things that really needed correcting as well.
A little too much for me to mess with anyway. So, the search continues. It's got to be "out there" I know it.
Both drives wearing along with I believe it would be the gimbal ring from side to side play. Sea water inlet hoses from drive up through gimbal area cracked and actually leaking. About 10 foot long and 2 inches wide area of the bow at the keel worn completely through and into the glass from beaching the boat. Bulkhead behind fuel tank from center stringer to port stringer was delaminated and glass broken through exposing wood (seller said he was "checking with a ball pein hammer")...ooof....bulkhead wood was soft. Both motors were quite wet with oil on the bottoms (pan areas). Deck stripes were worn through from buffing and or sun fading. Their were also a lot of petty things that really needed correcting as well.
A little too much for me to mess with anyway. So, the search continues. It's got to be "out there" I know it.
#47
Registered
Joined: Sep 2006
Posts: 4,002
Likes: 3
From: Tonawanda NY
My favorite color combo on these 272's is the red Imron painted hull and graphics from the 1987 model year. As luck would have I located one in northern IL for sale. After a lengthy phone call with the seller I ran up to check it out. Unfortunately, I returned again empty handed.
Both drives wearing along with I believe it would be the gimbal ring from side to side play. Sea water inlet hoses from drive up through gimbal area cracked and actually leaking. About 10 foot long and 2 inches wide area of the bow at the keel worn completely through and into the glass from beaching the boat. Bulkhead behind fuel tank from center stringer to port stringer was delaminated and glass broken through exposing wood (seller said he was "checking with a ball pein hammer")...ooof....bulkhead wood was soft. Both motors were quite wet with oil on the bottoms (pan areas). Deck stripes were worn through from buffing and or sun fading. Their were also a lot of petty things that really needed correcting as well.
A little too much for me to mess with anyway. So, the search continues. It's got to be "out there" I know it.
Both drives wearing along with I believe it would be the gimbal ring from side to side play. Sea water inlet hoses from drive up through gimbal area cracked and actually leaking. About 10 foot long and 2 inches wide area of the bow at the keel worn completely through and into the glass from beaching the boat. Bulkhead behind fuel tank from center stringer to port stringer was delaminated and glass broken through exposing wood (seller said he was "checking with a ball pein hammer")...ooof....bulkhead wood was soft. Both motors were quite wet with oil on the bottoms (pan areas). Deck stripes were worn through from buffing and or sun fading. Their were also a lot of petty things that really needed correcting as well.
A little too much for me to mess with anyway. So, the search continues. It's got to be "out there" I know it.
was that the darker red one?
#48
Thread Starter
Registered
Joined: Oct 2012
Posts: 99
Likes: 0
From: Cleveland, Ohio
Yeah that sounds right... it's like a burgundy. Cabin cushions are also burgundy. Darker red, white and black accents on gray cockpit upholstery. It's a rich combination.
I'll try my hand at uploading a pic, just for grins.
I'll try my hand at uploading a pic, just for grins.
#49
Registered
Joined: Sep 2006
Posts: 4,002
Likes: 3
From: Tonawanda NY
#50
Registered
Joined: Sep 2006
Posts: 4,002
Likes: 3
From: Tonawanda NY
too much cash but if he wants to sell he'll move
http://www.boattrader.com/listing/19...-Sr1-101826472
http://www.boattrader.com/listing/19...-Sr1-101826472


