Got tired of broken rocker switches, so I replaced them
#1
Registered
VIP Member
Thread Starter
Join Date: Jan 2007
Location: Sweet Home, North Alabama and Orange Beach
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Got tired of broken rocker switches, so I replaced them
Found these switches at Diamond Performance. Fab'ed a new panel and replaced all the rockers this last weekend. I also took out the mercruiser twin engine trim box, I was having delayed trim action when I used the trim in handle. Now everything works perfect. I took out all the old wiring and ran 3 conductor SO cord from the switches to the trim pumps. I dont have over trim lmit protection anymore but since I am the only person who drives it is a non issue.
[ATTACH=CONFIG]525451[/ATTACH]
[ATTACH=CONFIG]525451[/ATTACH]
#5
Registered
VIP Member
Thread Starter
Join Date: Jan 2007
Location: Sweet Home, North Alabama and Orange Beach
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Switches are cheap as hell compared to all new rockers. Plus they just look fuggin cool.
lemme know if I can assist.
lemme know if I can assist.
#8
Where To
VIP Member
Join Date: Nov 2001
Location: Alexandria Bay, NY 1000 Islands
Posts: 2,517
Likes: 0
Received 3 Likes
on
3 Posts
Might want to check out this whole thread, I'll start you off with a teaser!
Switches
http://www.offshoreonly.com/forums/f...ou-done-7.html
Switches
http://www.offshoreonly.com/forums/f...ou-done-7.html
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!