419 with bravos
#1
Registered
Thread Starter
Join Date: Feb 2007
Location: Desoto/STL, MO
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
419 with bravos
What drive shower does everyone thing is the best for the bravo one drives? Just bought a 419 with 502 efi motors and wanting to put the showers on the drives. What's the best halo or the top cap showers?
#2
Registered
I would recommend the drive shower that does not require that you drill a hole in your cavitation plate. there are a few out there that mount on the drive where the trim cylinders through bolt to the drive. I drilled holes in my cavitation plate and had to deal with corrosion from time to time. I had a 97 419 fastec and it was an amazing boat. I loved the triples, I have always thought it is a great way to get a lot of hp in a boat without all the high end maintenance of a 700+ hp engine. Good luck.
#3
Registered
Jimmy, I use the Simrek ones and I've always been really happy with them.
#5
Registered
Thread Starter
Join Date: Feb 2007
Location: Desoto/STL, MO
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts