311 sr1 questions
#1
Registered
Thread Starter
Join Date: Jan 2014
Location: Keystone lake
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
311 sr1 questions
Hey guys I have been looking at a deal that may go through on a solid 311 hull it's an 87 with no power etc but the price may be too good to pass. Who here has had one and are here any peculiarities or known issues i should look for or problem areas? Boat was complete till recently and like I said I'll be repowering it if I end up with it. Just checking to see how solid they were.
#3
Registered
Thread Starter
Join Date: Jan 2014
Location: Keystone lake
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Lol trying to decide if I want trs or if I want to track down everything and out kaamas on it. Any tips on anything to look for on this hull? Or they pretty solid?
#4
Registered
stringers, bulkheads and of course the transom. like all boats they are prone to aging and with out proper care they develop issues. The interiors need care, rigging gets scrambled over the years. I took everything out and put it back in again
#5
Registered
I just got one myself transoms where a problem not only where the drives are but also check the silent thunder swim platform if it has one . Stringers and bulkheads . Check under the cabin step it's hinged . Also from info I have found the gasket under the windshield goes bad and water can leak in where the screws but it doesn't show on the headliner. Good luck and keep us posted
#9
Registered
But they are great boats they are heavy I think the 311 weigh in at 7800 lbs but a guy on here said with stock 454s she will do 60 and they where built for ruff water . Also you can contact formula directly there Tec support is second to none