Looks Great!

How much of a pia was it?

The upper rail is peeling badly on my 292. Mainly where I rest my arm. I've decided that I'm going to disassemble just the top rail and re-paint in the off-season. Figure it will be easier then pulling the entire frame and glass off since anyone I've spoken to that has done it says they would never do it again. I believe I counted and its just 12 screws holding it in place.

Honestly I didn't think it was that bad at all. Not to much holding it on. Take pics of everything and use wd40 to slide the gaskets/glass back together. I would do it again no problem. The base of my frame was only screwed down no nuts and bolts at all..maybe that's why it went easier for me

Any new updates?..

Not a Fornula, but I had mine cut down and painted to match boat graphics. I think it looks ALOT better. It's your boat, paint it your way!

http://i16.photobucket.com/albums/b1...pskqbl3frt.jpg

I sent a couple pieces out for paint that were peeling badly that I just got back yesterday. I think my guy did a good job of matching the color, but he cleared them. I'm all for shinny, but the rest of the windshield is a flat or matte finish. Looks like I'll just have some taping and painting to do, at least its clear.

How well does the paint hold up to the abuse of a cover going down the highway???

I tow sometimes with the cockpit cover on. It has a cotton lining where it toches the paint and or gel. It hasn't caused any problems so far.

I did have to have a new cover made when I cut the windshield down, and it is quite a bit nicer than the factory cover.

Ya I gotta figure out something. Might paint it and then put those swim noodles over the frame when the covers on the boat...cause I tow with the cover on mainly...

The cover was not the cause of my paint peeling. I rest my forearm on the frame when idling and right where I put it just wore away.