Fastest Formulas
#94
#97
Registered

Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
My Arneson drives have been a solid performer. Bravo XR's were a big problem, even with original power. You'll gain top end speed. No docking issues, just different. With my install, we did have to move the motors 3" forward. I used a local shop and they worked with Rik on the install.
Last edited by kjm5125; 02-07-2025 at 06:50 AM. Reason: addition
#98
Nice set up. I was Real close to pulling the trigger on Arnesons after I ate several sets of XRs. Talked to Rik a few times.
Decided on SCXs mostly because of the cut yo AzZ in the water when swimming if not really careful.
Not that Drunks are not careful.
and don't forget the Rooooosttt!!
Close to 800HP on my punched out 575's.
Decided on SCXs mostly because of the cut yo AzZ in the water when swimming if not really careful.
Not that Drunks are not careful.
and don't forget the Rooooosttt!!Close to 800HP on my punched out 575's.
#99
My Arneson drives have been a solid performer. Bravo XR's were a big problem, even with original power. You'll gain top end speed. No docking issues, just different. With my install, we did have to move the motors 3" forward. I used a local shop and they worked with Rik on the install.
They look great. Is this a 382? Did you pickup any speed over the Bravos?









