87 242 Ls with Silent Thunder
#1
Registered
Thread Starter
87 242 Ls with Silent Thunder
Hi Formula owners,
I'm looking for any information on where I can find a replacement molding/rub rail for the silent thunder swim platform for our 242 ls. This is the molding/rub rail where the two halves of the swim platform join. I have contacted Formulas boats, but have not received any response. The original molding/rub rail is cracked.
As always, any information would be greatly appreciated,
Regards,
Tony S.
I'm looking for any information on where I can find a replacement molding/rub rail for the silent thunder swim platform for our 242 ls. This is the molding/rub rail where the two halves of the swim platform join. I have contacted Formulas boats, but have not received any response. The original molding/rub rail is cracked.
As always, any information would be greatly appreciated,
Regards,
Tony S.
#2
Platinum Member
Platinum Member
iTrader: (2)
This might be close. Best to contact the company for a sample. I'll add that I bought a piece off an '87 and it was slightly different to the one on my '89. Considering the silent thunder is separate from the rest of the boat, you may be able to replace it and have it look good without it being a 100 percent match.
https://www.integritymarinecorp.com/...-solid-rubrail
https://www.integritymarinecorp.com/...-solid-rubrail
The following users liked this post:
distantthunder (03-01-2021)
#3
Registered
Thread Starter
This might be close. Best to contact the company for a sample. I'll add that I bought a piece off an '87 and it was slightly different to the one on my '89. Considering the silent thunder is separate from the rest of the boat, you may be able to replace it and have it look good without it being a 100 percent match.
https://www.integritymarinecorp.com/...-solid-rubrail
https://www.integritymarinecorp.com/...-solid-rubrail
Again, Many Thanks for answering the post.
Tony S