Addition to the 292
02-09-2022, 12:33 AM
#11
Registered
Thread Starter
Cabinet for the AC unit. I drew up my cabinet plans so each level could be removed easily. So if the AC unit had to be removed, I wouldn't have to cut anything.
Pump is bolted down with Double End Threaded Bar Rod Stud Bolts. Remove 4 nuts and lift off studs for R&R if needed
Put a hole in the step and taped a round stock bar to open/close tru-hull ball valve
Galvanic Isolator for shore power
Top lid for garbage bin. Never used it because the Microwave sits on top of it.
