Go Back  Offshoreonly.com > Owners Forum > Formula
Dead around here.... >

Dead around here....

Notices
Formula

Dead around here....

Old 03-28-2024 | 06:52 PM
  #21  
Registered
 
Joined: Dec 2022
Posts: 111
Likes: 67
From: Mason, OH
Default

I’ll add on Tom….. sadly my early winter project of rub rail is still not complete. All sides are now bolted. Need to just stretch out the new run rail and get busy. But after seeing what I did with the deck hull joint, I started to look at other things that may need sealing.

pulled deck hatches…. They were loose. Ended up cleaning them and painting them sealed them up and installed.

pulled rub rail bolts and sealed the holes and rebolted.

not real sure how I got onto this, but because I had to pull headliner down to do the hatch resealing, I’m now finding myself pulling new speakers wires and replacing the stereo and putting in a complete new system.





Shims to help allow sealer between hull and deck


Port side new through bolts. Larger surface. Plus doubled up the quantity of through bolts.
MyIsland3 is offline  
Reply
Old 03-29-2024 | 12:35 PM
  #22  
Registered
10 Year Member
 
Joined: Feb 2013
Posts: 164
Likes: 150
From: LI,NY
Default

Originally Posted by MyIsland3
I’ll add on Tom….. sadly my early winter project of rub rail is still not complete. All sides are now bolted. Need to just stretch out the new run rail and get busy. But after seeing what I did with the deck hull joint, I started to look at other things that may need sealing.

pulled deck hatches…. They were loose. Ended up cleaning them and painting them sealed them up and installed.

pulled rub rail bolts and sealed the holes and rebolted.

not real sure how I got onto this, but because I had to pull headliner down to do the hatch resealing, I’m now finding myself pulling new speakers wires and replacing the stereo and putting in a complete new system.





Shims to help allow sealer between hull and deck


Port side new through bolts. Larger surface. Plus doubled up the quantity of through bolts.
Is that a side mount toolbox on your trailer? If so how did you mount it? Ive been looking for a box for my aluminum I-beam trailer.
anger mgmt is offline  
Reply
Old 03-29-2024 | 03:12 PM
  #23  
Registered
 
Joined: Dec 2022
Posts: 111
Likes: 67
From: Mason, OH
Default

I assume the long tool box is the one in question. It is the typical side of truck bed tool box. The way I installed it was bolt the part that sits on I beam frame. But then I also ran 2 pieces of 1” alum tube from under the bottom of box across both sides of the trailer frame. This tool box holds my jack, some tools, bearings, extra hubs.

the smaller tool box I put alum plate inside it and bolted it to an aluminum piece of angle iron I bolt to the trailer frame. Holds some cleaners and place to put straps when removed from boat.
MyIsland3 is offline  
Reply
Old 03-29-2024 | 04:56 PM
  #24  
Registered
 
Joined: Dec 2022
Posts: 552
Likes: 264
Default


My son picked up this 12 cyl toy pretty cool.
105Fountain is offline  
Reply
Old 03-29-2024 | 06:05 PM
  #25  
Registered
10 Year Member
 
Joined: Feb 2013
Posts: 164
Likes: 150
From: LI,NY
Default

Originally Posted by MyIsland3
I assume the long tool box is the one in question. It is the typical side of truck bed tool box. The way I installed it was bolt the part that sits on I beam frame. But then I also ran 2 pieces of 1” alum tube from under the bottom of box across both sides of the trailer frame. This tool box holds my jack, some tools, bearings, extra hubs.

the smaller tool box I put alum plate inside it and bolted it to an aluminum piece of angle iron I bolt to the trailer frame. Holds some cleaners and place to put straps when removed from boat.
Thanks. Yes , I was referring to the long box.
anger mgmt is offline  
Reply
Old 03-29-2024 | 07:45 PM
  #26  
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 1,107
Likes: 685
Default

post 10 with the white truck is that the bridge that came down?
boostbros is offline  
Reply
Old 03-29-2024 | 08:49 PM
  #27  
F-2 Speedy's Avatar
Platinum Member
Community Builder
10 Year Member
Platinum Member
 
Joined: May 2012
Posts: 11,425
Likes: 3,953
From: Midwest & T-Rock
Default

Been in TX for a month helping out family, bought a new truck, white metallic pearl




F-2 Speedy is offline  
Reply
Old 03-29-2024 | 10:17 PM
  #28  
Registered
15 Year Member
 
Joined: Apr 2010
Posts: 124
Likes: 38
From: Holland
Default

This is the first winter here in northern MI that I didn't start thinking about moving and then simmer on the idea all winter. I've been out about 6 times in 2024 and the coldest was in the 50s. Odd how much that can change the way I feel about winter. Waiting for that first day with some nice warm air to dial in my carbs a little and hopefully save a little fuel this year.
im MartinB is offline  
Reply
Old 04-04-2024 | 05:22 PM
  #29  
Registered
5 Year Member
 
Joined: Mar 2016
Posts: 16
Likes: 13
From: Wisconsin
Default

Not much going on
wolffie99 is offline  
Reply
Old 04-04-2024 | 07:05 PM
  #30  
Registered
 
Joined: Dec 2022
Posts: 552
Likes: 264
Default


She don't like Best western Ft Myers waterfront $600@ vet stay clear
105Fountain is offline  
Reply

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.