Resurected we need to talk. You are doing some things that REALLY concern me..... Did you support the hull very well from under it? If not make sure that the hull is still straite on the bottom!!!

This is the play by play on my job. http://www.offshoreonly.com/forums/s...nt+Formula+302

And to think mine was bad... Mine looks like an oil change in comparison.

Bryanw: Is yours a 302? My bracing is WAY different then that. Mine go at a criss cross not straite like that. Wonder why the change.....

John,

It is an 84 302. I believe it is original, with any luck one of the other 84 owners will chime in...

Bryan

He musta got his from Moses, would hate to think Noah had two of em

Audiofn... Your project looks exactly the same as mine, from the rats nest of wiring to the lack of glass and resin over the stringers and bulkheads! My boat is a little smaller so there was a little less work. It's a 233. I did support the hull to make sure of no deformation. The only part of my project that really burns my @$$ is, I was told when I bought the boat the structure was all repaired four years ago. When I got into it, it was obvious that it had been repaired, but very poorly

I thought I had posted pics of our 311sr on here ill have to take some new ones this coming weekend and post them up.

Finally got the digital camera ...

Couple others ...