![]() |
336SR1 - How fast with twin 7.4 330hp's
What would the top speed be with this power? Cruise?
Is this boat underpowered? Thanks |
My guess would be 60 ish top end. 3000 rpm cruise 35mph perhaps.
It's it under powered? That's totally opinionated. To me , it's underpowered any time it's not scarey at WOT:D |
Powerguy, I think alot of the 336's are out there w/ 454. mags and 502 mags. If I remember, it took the 502's to get ya close to 70mph! Wrink
|
wrinkleface-
I am looking at a 93 with 330's and am wondering if I would be happy with 60mph (hopefully?) or should I look for one with 454 mags or 502's. I guess I could always buy the one with 330's and change out the long blocks to 454 mag's. Most of my time is spent at 45-50mph anyway. |
Powerguy, as mopower said, it is personal opinion as to if you would be happy w/ 60mph. If you do the 45-50 area, it may be right for you!!!??? Good Luck, Wrink
|
Offshore powerboats are a curse. You think you're happy at sixty, then someone goes by you at sixty-five, then you want seventy. It's the curse of the all mighty mile per hour. My opinion is a 336 with 330's is underpowered. Of course you could always toss a supercharger on them........ ;)
|
Re: 336SR1 - How hast with twin 7.4 330hp's
Originally posted by powerguy What would the top speed be with this power? Cruise? Is this boat underpowered? Thanks |
You are right about wanting more power. The logical swap would be to upgrade with 454 mag or 502 long blocks.
|
Powerguy,
Seems like it may be underpowered. Those engines are gonna hurt resale, too! On the positive side, the boat should be a good bargain the way it is. Buy it right, pull those motors and sell them and drop in a nice pair of stock 502 EFI's!!!!! I bet those 330's are carbed, right? Go EFI, you won't regret it. Toolman :D |
toolman-
yes, 330 carb motors. My guess is 60mph tops. I have heard 70+ with 502's. |
| All times are GMT -5. The time now is 03:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.