|
Re: Cuda
I have 4" spacers on my manifolds so that I can have the slope to get the water to flow back. FYI Mine are NOT stock. The former owner was a total butcher and had mounted them up high. However even were I have mine located I NEVER feel comfortable sitting in any wakes at all with the motors off as I am afraid of water going up the exhaust and into the motors.
Jon |
Re: Cuda
Originally Posted by Audiofn
Yours are MUCH lower then mine. Mine come out up half in and out of the drop off above yours. So the bottom of mine are about even with the top of yours.
Jon Jon, Just was reading some old posts... Mine also come out almost centered on the lip above Cuda's. My origional holes are quite clear to see and are close to the position in Cuda's pics... What are you running for Exhaust? I have stock manifolds and Imco Risers in 4" with Corsa Silent Choice. Let me know if you need any pics. Bryan |
| All times are GMT -5. The time now is 07:40 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.