Cuda

Reply Subscribe

Thread Tools

08-29-2004 | 10:24 PM

#11

Audiofn

Thread Starter

Charter Member #232

Joined: Oct 2000

Posts: 18,417

Likes: 6

From: Carlisle, MA USA

Re: Cuda

I have 4" spacers on my manifolds so that I can have the slope to get the water to flow back. FYI Mine are NOT stock. The former owner was a total butcher and had mounted them up high. However even were I have mine located I NEVER feel comfortable sitting in any wakes at all with the motors off as I am afraid of water going up the exhaust and into the motors.

Jon

__________________
Put your best foot forward!

10-27-2004 | 05:11 PM

#12

Bryanw

Registered

Joined: Jun 2004

Posts: 68

Likes: 0

From: Lake Havasu AZ

Re: Cuda

Quote:

Originally Posted by Audiofn

Yours are MUCH lower then mine. Mine come out up half in and out of the drop off above yours. So the bottom of mine are about even with the top of yours.

Jon

Jon,

Just was reading some old posts... Mine also come out almost centered on the lip above Cuda's. My origional holes are quite clear to see and are close to the position in Cuda's pics... What are you running for Exhaust? I have stock manifolds and Imco Risers in 4" with Corsa Silent Choice.

Let me know if you need any pics.

Bryan