|
Re: Formula Dash Panels
Originally Posted by PhantomChaos
Jon....I'm assuming 1.5:1 ratio.....we ran them on a dyno, but the dyno was more to dial in the fuel presure and check things. It wouldn't take the full power. I think his dyno is rated at 500hp. The motors never left the boat. It will be in Family Performance Boating magazine.
Kevin....who is Maveric Marine in the valley. Joe Bacca trained with him before he worked for Dick Simon and then got his own shop. How is your bad machine coming? Still haven't seen it (actually run) yet!! :D :D Yeah you have 1.5 drives. They prop dyno at Maveric is for tunning and testing, does not accuratley measure HP and that's not what it is for. It is used or setting fuel pressure and diagnosing problems that onyl ocour under a load, usefull tool but not for measuring power. |
Re: Formula Dash Panels
Jon....nothing extra in the cabin this time......just fixed items (lights and stuff). It was short fused due to Havasu. :) Jon....come on out! We have room for you kids! Tank's getting married the following weekend with an open invite.....see the SCOPE site. :evilb: :evilb: :evilb:
HillBilly...still got that $50 tow truck? :D We're thinking about going ut next Sunday to check things out........ |
Re: Formula Dash Panels
Originally Posted by PhantomChaos
Jon....nothing extra in the cabin this time......just fixed items (lights and stuff). It was short fused due to Havasu. :) Jon....come on out! We have room for you kids! Tank's getting married the following weekend with an open invite.....see the SCOPE site. :evilb: :evilb: :evilb:
HillBilly...still got that $50 tow truck? :D We're thinking about going ut next Sunday to check things out........ |
Re: Formula Dash Panels
Originally Posted by PhantomChaos
Jon....nothing extra in the cabin this time......just fixed items (lights and stuff). It was short fused due to Havasu. :) Jon....come on out! We have room for you kids! Tank's getting married the following weekend with an open invite.....see the SCOPE site. :evilb: :evilb: :evilb:
HillBilly...still got that $50 tow truck? :D We're thinking about going ut next Sunday to check things out........ |
Re: Formula Dash Panels
1 Attachment(s)
This piece that clicks into the latch broke off the back of my dash panel.
Anyone have ideas on how to re-attach it? |
Re: Formula Dash Panels
Nort,
Looks like your fabricator placed a similar bracket on your new dash panel in pic 2 post #57. Can you find out how he attached it? Thanks, Chris |
Re: Formula Dash Panels
2 Attachment(s)
You guys are lucky with the newer dsah styles. I've got a 1987 SR357 and I've been trying to make a tracing for a new dash panel for the last 6 months. Obviously I'm not a draftsman or artist and I'm glad I don't have to try and make a living doing that.
what a nightmare to update the looks--any suggestions ? has anybody updated this old resin'bucket dash? |
Re: Formula Dash Panels
Originally Posted by PhantomChaos
Making a few extra blanks with NO gauge holes. Who knows......somebody might want to get one from me!!! :drink: :drink:
I may be needing one of these. Got any left? What did you plate with and what kind of paint did you use? Could I have your fabricator cut holes and attach latch bar? |
Re: Formula Dash Panels
ttt
|
Re: Formula Dash Panels
Chris
I have some kinda something around here.......just got back in town. I'll look at them tommorroowwwwss. :D |
| All times are GMT -5. The time now is 10:23 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.